Toshiba IK-64DNA Manuale Utente

TOSHIBA INSTRUCTION MANUALCCD COLOR CAMERAIK-64DNAPlease read this manual thoroughly before use, and keep it handy for future reference.Reco

Use the SELECT AT switches to select 001 to 2557-3-2 ADDRESSMove the cursor to the position in Fig.7-3-3 ProtocolMove the cursor to the position in Fi

8-2 B.C.G ControlD/N control setup of a sub menu is set to B.C.G and an internal switch is set to the BCG side, the foliowing remote controi is possib

11. SPECIFICATIONSPowerAC24V 10% 60(50) Hz / DC12V 10%Power consumption 7.5W with Al lensImage sensor1/3 inch high sensitive CCDImage pickup area 4.96

-23-LIMITED WARRANTYCCD SECURITY CAMERAThe Imaging Systems Division of Toshiba America infbrmation Systems, Inc. ("ISD") mates the following

IMPORTANT SAFEGUARDS1. Read InstructionsAll the safety and operating instructions shouid be read before the product is operated.2. Retain Instructio

1. FEATURES & DESCRIPTIONThe IK-64DNA has the following features .([email protected] Minimum illumination in BA/V mode New IR-sensitive CCD and Auto-

5. CONNECTIONS AND OPERATIONS :--------------------------------Notes on connecting------------------------------• Power plugs of connected equipment m

5-4 Back-Focus AdjusmentBack focus is adjusted at the factory to accommodate most standard lenses. If a slight adjustment Is needed, mount the lens to

Switch name Select ▼A7-1 .Setting switches and the functionsOn the side panel of the cameras there are three push button switches as shown below:Main

7-2-4 SHUTTERExposure time setting in AES (MES) position of iRiS switch on rear of the cameraMove the cursor to the position in Fig. Use the SELECT sw

Use the SELECT switches to seiect LOW, MID, HiGH7-2-8 SHARPNESSMove the cursor to the position in Fig.rD/N MODE AUTOD/N LEVEL HIGHD/N FIL ONSHUTTER AU

Press the SELECT switch to save ali changes and exit the menu.7-2-14 EXITMove the cursor to the position in Fig.7-2-15 DEFAULTMove the cursor to the p